Buffalo WCR-HP-G300 Login
Buffalo WCR-HP-G300 login: open 192.168.11.1 and sign in with username admin / password password. Default IP, setup & reset guide.
Admin login URL
- Username
- admin
- Password
- password
Connect to your Buffalo WCR-HP-G300 network, then open the URL above in your browser.
Last verified 22 Jul 2021
WCR-HP-G300 login combinations
| IP Address | Username | Password |
|---|---|---|
| 192.168.11.1 | admin | password |
| 192.168.11.1 | admin | root |
| 192.168.13.1 | randomly generated | admin |
| 192.168.11.1 | 1234 | root |
| 192.168.11.1 | root | password |
How to log in to Buffalo WCR-HP-G300
-
1
Connect to the network
Join the Buffalo WCR-HP-G300's WiFi or plug in an Ethernet cable.
-
2
Open the admin page
Type
http://192.168.11.1into your browser address bar and press Enter. -
3
Enter your credentials
Use the default username and password shown above. If they don't work, try the combinations in the table.
-
4
Change your settings
Update WiFi name, password, or other settings. Save before closing.
Frequently Asked Questions
What is the default IP for the Buffalo WCR-HP-G300?
The Buffalo WCR-HP-G300 uses 192.168.11.1 as its default login IP address.
What are the default WCR-HP-G300 login credentials?
Try username admin and password password.
How do I log in to the WCR-HP-G300?
Connect to the router, open http://192.168.11.1 in a browser and enter the username and password above.
How to login to buffalo wcr-hp-g300?
Open your router's gateway IP in a browser and enter the default username and password listed on the Buffalo WCR-HP-G300 Login page.
Related searches
Popular ways people look for this page.